Rennsimulanten Merchandise Shop

Abstimmungsfrage.

Mehr
16 Jahre 5 Monate her #268828 von Rennsimulant
Abstimmungsfrage. wurde erstellt von Rennsimulant
Ich habe ein Problem mit den Fahrzeugen.

Wenn ich mit den Standart Setups fahre, habe ich immer das Problem, dass die Fahrzeuge immer so tierisch über die Vorderachse schieben. Weiterhin ist das einlenkverhalten so schwach als wenn ich gar nicht um die Kurve komme.

In Verbindung mit dem schlechten einlenkverhalten und das über die Vorderachse schieben habe ich extreme Probleme mit dem Kurvenfahren. Welche einstellungen habt ihr Spielseitig und mit eurem Lenkrad?

Ich habe ein Logitech MOMO Force Racing.
Treibereinstellung sind:
Intensität der Effekte 110%
Ferder und Dämpfungseffekt 0%
Zentrierfeder aktiviert aber mit 0%
Spieleinstellungen auf zulassen, dass das Spiel die Einstellungen ändert.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
16 Jahre 5 Monate her #268829 von TheDriver89
Ähmm, was hat deine Wheeleinstellung mit dem Untersteuern der Fahrzeuge zu tun? Die normalen, von Simbin vorgefertigten Setups sind eher untersteuernd ausgelegt, da die meisten Fahrer damit weniger Probleme haben, als mit einem übersteuernden Fahrzeug. Ich bin jetzt zwar kein Setup-Profi, aber wenn du das Untersteuern wegbekommen willst, bzw. mehr Grip auf der Vorderachse brauchst, kannst die Federn, Dämpfer und/oder Querstabis vorne weicher und hinten härter machen, die Sperrwirkung verringern (damit lenkt das Auto beim Bremsen besser ein), erhöhst die Sperre (damit übersteuert das Auto beim Gas geben mehr), erhöhst den Nachlauf oder erhöhst (also mehr in den Minusbereich) die Vorspur und du kannst auch über die Spoiler einiges rausholen, also vorne mehr und hinten weniger Spoiler.

EDIT: Noch ein zugegeben blöder Gedanke, aber man weiß ja nie. Bremst du vor Kurven ab? Also nicht so wie in NFS voll in die Kurve, das geht hier nicht, dann schiebt nämlich alles gerade aus :laugh:.

EDIT 2: Hier noch meine Einstellungen von meinem alten Momo, fand das ganz gut ;):

FFB Device Name="LOGITECH MOMO RACING USB"
FFB Rumble Pad="0" // Type of FFB controller: 0=wheel, joystick etc with force feedback, 1 = pad with rumble motor
FFB Effects Level="2" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom.
FFB Gain="1.00000" // Strength of Force Feedback effects. Range 0.0 to 1.0.
FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis.
FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis.
FFB steer vibe freq mult="0.07000" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration.
FFB steer vibe zero magnitude="0.00000" // Magnitude of steering vibration at 0mph (reference point).
FFB steer vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude).
FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB steer force average weight="0.90000" // How much weight is given to new steering force calculations each frame (0.01 - 1.0). Lower values will smooth out the steering force, but will also add latency.
FFB steer force exponent="0.75000" // Steering force output "sensitivity". Range 0.0 to infinity. 0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity.
FFB steer force input max="-11500.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction).
FFB steer force output max="0.90000" // Maximum force output of steering force, recommendation 0.8 to 2.0
FFB steer force grip weight="0.40000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9. How much weight is given to tire grip when calculating steering force.
FFB steer force grip factor="0.60000" // Range 0.0 to 1.0, recommended: 0.2 to 0.6. How much of a factor the front wheel grip is on the steering weight.
FFB steer update thresh="0.0001500000" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate.
FFB steer friction coefficient="0.10000" // Coefficient to use for steering friction. Range: -1.0 to 1.0
FFB steer friction saturation="1.00000" // Saturation value to use for steering friction. Range: 0 - 1.0
FFB steer damper coefficient="0.10000" // Coefficient to use for steering damper. Range: -1.0 to 1.0
FFB steer damper saturation="1.00000" // Saturation value to use for steering damper. Range: 0 - 1.0
FFB throttle vibe freq mult="0.40000" // Scales actual engine frequency to force FFB vibration frequency. Suggested range: 0.10 to 0.50
FFB throttle vibe zero magnitude="0.00000" // Magnitude of engine vibration at 0rpm (reference point).
FFB throttle vibe slope="-2.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude).
FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB throttle vibe update thresh="0.02000" // Amount of change required to update throttle vibe (0.0 - 1.0)
FFB brake vibe freq mult="0.90000" // Scales actual brake rotational frequency to force feedback vibration frequency.
FFB brake vibe zero magnitude="0.09000" // Magnitude of brake vibration at 0mph (reference point).
FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude).
FFB brake vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB brake vibe update thresh="0.02000" // Amount of change required to update brake vibe (0.0 to 1.0)
FFB rumble strip magnitude="0.35000" // How strong the rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect.
FFB rumble strip freq mult="0.50000" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev.
FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB rumble strip pull factor="-0.70000" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5.
FFB rumble strip update thresh="0.07500" // Amount of change required to update rumble strip effect (0.0 - 1.0)
FFB jolt magnitude="0.80000" // How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0.
FFB Joy[00] Axis[00] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[00] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[00] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[00] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[01] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[01] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[01] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[01] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[02] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[02] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[02] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[02] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[03] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[03] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[03] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[03] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[04] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[04] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[04] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[04] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[05] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[05] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[05] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[05] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[06] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[06] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[06] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[06] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[07] Spring Saturation Pos="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[07] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[00] Axis[07] Spring Saturation Neg="0.00000" // DirectInput Saturation to use for spring
FFB Joy[00] Axis[07] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[00] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[00] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[00] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[00] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[01] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[01] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[01] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[01] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[02] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[02] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[02] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[02] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[03] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[03] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[03] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[03] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[04] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[04] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[04] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[04] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[05] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[05] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[05] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[05] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[06] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[06] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[06] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[06] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[07] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[07] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[01] Axis[07] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[01] Axis[07] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[00] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[00] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[00] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[00] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[01] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[01] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[01] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[01] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[02] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[02] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[02] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[02] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[03] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[03] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[03] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[03] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[04] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[04] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[04] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[04] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[05] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[05] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[05] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[05] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[06] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[06] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[06] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[06] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[07] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[07] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring
FFB Joy[02] Axis[07] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring
FFB Joy[02] Axis[07] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring

Einfügen tust du das bei Vista unter Dokumente-->Simbin-->Race07-->Userdata-->Controlset-->"Name".rcs Die rcs-Datei öffnest mit nem Editor und scrollst nach unten, bis zu dem Abschnitt, den ich dir hier rein kopiert habe. Dann einfach so weit markieren und meine Einstellungen einfügen, vorher aber deine Einstellungen extra speichern, falls meine nicht gefallen. Im Profiler hatte ich FFB auf 100 und alles andere auf 0, Zentrierfeder aktiviert.

Gruß
TheDriver

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
16 Jahre 5 Monate her #268833 von Rennsimulant
Danke für deine Einstellungen.Werde dies ausprobieren.
Natürlich fahre ich nicht mit Vollgas in die Kurven. Ich kenne den Realismuss von LifeForSpeed.
Das Problem ist aber, wenn ich vor der Kurve bremse und danach einlenke, schiebt er einfach geradeaus weiter. Wenn ich dann kein Gas gebe und noch nen Gang weiter runterschalte und das Lenkrad auf vollen Einschlag habe kommt die Karre einfach nicht rum.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
16 Jahre 5 Monate her #268835 von TheDriver89
Dann gib mal bitte mehr Informationen. Also welche Strecke, welches Auto, wie hoch hast du den Lenkeinschlag eingestellt? Überlenkst du das Auto? Dann schiebt es ja auch. Oder du fährst einfach zu schnell in die Kurve rein? Passiert das auch bei langsamer Fahrt?

Gruß
TheDriver

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
16 Jahre 5 Monate her #268848 von Rennsimulant
Strecke ist wurst. Lenkeinschlag wäre das Stichwort. Langsame Fahrt nicht, aber im Renntempo.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
16 Jahre 5 Monate her #268849 von TheDriver89
Leider ist meine Glaskugel defekt, daher weiß ich immer noch nicht welchen Lenkeinschlag du fährst ;) . Aber wenn es bei langsamer Fahrt funktioniert, behaupte ich mal, dass du erstens zu schnell in die Kurve fährst, zweitens zu viel einlenkst und dabei überlenkst und drittens, deine Linie nicht stimmt.

Gruß
TheDriver

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Ladezeit der Seite: 0.124 Sekunden
No module Published on Offcanvas position